Integrating Cisco MDS 9124 switches with Nexus 5500sPosted: October 28, 2013 Filed under: Cisco Nexus, Networking | Tags: 5500, 5548, 5596, 55xx, 9124, Cisco, cisco mds, fc, fibre channel, mds, Nexus Leave a comment
I wanted to take a short minute and document the addition of a few Cisco MDS 9124s to our test lab at work. The purpose of the addition in the test lab is just to show the functioning and capabilities of the devices to work together. See my previous post on configuring native FC over a Nexus 5548 and 5596. The FC-specific portions of the MDS config are very similar to the Nexus line. Here’s what the middle state looks like. I haven’t taken the time to move the NetApp FC links to the MDS switches yet (or the UCS FC links instead), but the port provisioning process will be similar to those already documented in this post and the Nexus post. The Visio of what’s configured is below followed by my MDS configuration notes.